Australian owned and built for Aussie Conditions
Euro Bar
The Euro Bar is used in the 2500 Series
Fitments and matched to fit the contours of
your vehicle’s roof. Easy to install and remove
– it is ideal as a non-permanent solution yet
offers great strength and durability.
Vortex Aero Bar
The Rhino-Rack Vortex bars can be purchased
in black or silver and is cut to 7 different
predefined lengths to suit different vehicles.
All bars include the VGS rubber strip which has
been designed to reduce wind drag and noise
as well as providing added protection for your
roof racks and load. All bars include
SecureCore locking end caps.
Heavy Duty Bar
The Rhino-Rack Heavy Duty bars can be
purchased in black or silver and can be cut to
8 different predefined lengths to suit different
vehicles including: 1120mm, 1250mm,
1375mm, 1500mm, 1650mm, 1800mm,
2000mm, 2400mm. All bars include the rubber
strip.
CXB
The Rhino CXB leg suit the Rhino Heavy Duty
Bar only and is designed fit onto Factory Rails.
Also available to suit the CXB are leg height
spacers from 6mm to 24mm used to increase
bar clearance and level up 3 or more cross
bars.
RLCP - Fixed Point Mount
The RLCP has been designed to complement
the looks of your vehicle utilising the factory
mounting points on some vehicles. Capable of
carrying loads up to 150kg and have vehicle
specific foot pads offering level bars over the
length of the vehicle. Durable and
recommended for off road touring.
RLTP and RLTF Track legs
These track legs come in two heights, 50mm
and 80mm (plus Bar), and can be fitted to
different areas of your vehicle including the
roof, canopy and hard lids. Combined with
tracks they can carry loads up to 125kg’s and
are one of the best option if you are travelling
off road.
Rhino Rack
To find a Rhino roof rack for your vehicle Click here to go to Rhino’s Website.
Rhino has a great range of roof racks including Heavy Duty, Vortex, 2500 Series and Roof Rack Accessories including bike carriers , roof
top luggage boxes, kayak carriers, ski & snowboard carriers, windsurf & surfboard carriers. Plus alloy trays, steel mesh baskets, ladder
racks, Boat loaders and much, much more.
Below are a selection of Roof Racks made by Rhino Roof Racks. If you need help in working out which rack is right for you call one of
our salespeople or email us.
Bar Profiles
Leg Samples
RLT500
The RLT500 is next generation of track legs
that allow the leg to pivot to pick up the angle
of the track and compliment the looks of your
vehicle. Compatible with both the Heavy Duty
Bar and Vortex Aero bars. Combined with
tracks they can carry loads up to 125kg’s and
are one of the best option if you are travelling
off road.
Fixed Pad Mount
The Rhino Fixed Pad mount come in two
heights and two variations to either fit
permanently to your vehicle roof or to
canopies for lighter load situations. They have
a unique rotation pad design to fit most roof
contours.
Gutter Mount
The original and still the best, the Rhino
Gutter mount leg has been around for 25 years
and still going strong. Fully removable
and available in a range of heights to suit your
vehicle. They are durable and the industry
standard for commercial use.
SX to suit Raised Rails
This style is suitable for vehicles with raised
roof rails (most of the rails you can fit your
hand between the roof and the roof rail) and
are compatible with the Vortex bar. They are
simple to install and remove at your
convenience but with the VGS rubber in they
can be left on with minimal wind noise.
Vortex SB
Designed to utilise factory mounting points or
Rhino tracks, the Vortex SB range will
complement the look of your vehicle, best
suited to light loads and narrow loads.
SX to suit Solid Factory Rails
These legs are suited to solid factory roof rails
and are easy to install with the built in
tensioner. They come with unique internal pad
design to suit vehicle specific rails and are
lockable using Rhino’ Secure core.
2500 Euro
The 2500 Euro Roof Rack system is a good
budget starting point for a roof rack system.
Easily fitted and removed at your
convenience.
HD 2500
With all the same features of the VA 2500
(excluding key locks) the HD 2500 is best
suited for the use of the Heavy duty
accessories or if you need to oversize your
bars.
VA 2500
The VA 2500 range is the quietest of the 2500
range utilising Rhino’s VGS rubber strips to
reduce wind noise. Comes complete with all
the tools you need and metal key locks.
Vehicle specific pads and straps ensures it is a
safe and secure fit on your vehicle and the bar
can be raised in height using spacers for
greater clearance if required.